manualshive.com logo in svg

ZyXEL Communications XS1930-10, Руководство пользователя

Сетевой коммутатор ZyXEL Communications XS1930-10 - надежное устройство для организации сетей. Для полноценного использования предлагаем бесплатное руководство пользователя. Скачайте его с manualshive.com и настройте вашу сеть без труда. Удобное решение для бизнеса и дома.

Поделиться
Скачать
background image

Chapter 4 The Web Configurator

XS1930 Series User’s Guide

60

VLAN

This link takes you to screens where you can configure port-based or 802.1Q VLAN (depending 
on what you configured in the Switch Setup menu). You can also configure a protocol based 
VLAN or a subnet based VLAN in these screens.

Static MAC 
Forwarding

This link takes you to a screen where you can configure static MAC addresses for a port. These 
static MAC addresses do not age out.

Static Multicast 
Forwarding

This link takes you to a screen where you can configure static multicast MAC addresses for 
port(s). These static multicast MAC addresses do not age out.

Filtering

This link takes you to a screen to set up filtering rules. 

Spanning Tree 
Protocol

This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent 
network loops. 

Bandwidth 
Control

This link takes you to a screen where you can configure bandwidth limits on the Switch.

Broadcast Storm 
Control

This link takes you to a screen to set up broadcast filters. 

Mirroring

This link takes you to screens where you can copy traffic from one port or ports to another port 
in order that you can examine the traffic from the first port without interference.

Link Aggregation

This link takes you to screens where you can logically aggregate physical links to form one 
logical, higher-bandwidth link.

Port 
Authentication 

This link takes you to a screen where you can configure IEEE 802.1x port authentication for 
clients communicating via the Switch.

Port Security

This link takes you to screens where you can activate MAC address learning and set the 
maximum number of MAC addresses to learn on a port. 

Time Range

This link takes you to a screen where you can define different schedules.

Classifier

This link takes you to screens where you can configure the Switch to group packets based on 
the specified criteria. 

Policy Rule

This link takes you to a screen where you can configure the Switch to perform special treatment 
on the grouped packets. 

Queuing Method This link takes you to a screen where you can configure queuing with associated queue 

weights for each port.

Multicast

This link takes you to screens where you can configure various multicast features, IGMP 
snooping, MLD snooping-proxy and create multicast VLANs.

AAA

This link takes you to a screen where you can configure authentication, authorization and 
accounting services via external servers. The external servers can be either RADIUS (Remote 
Authentication Dial-In User Service).

Loop Guard

This link takes you to a screen where you can configure protection against network loops that 
occur on the edge of your network. 

Layer 2 Protocol 
Tunneling 

This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling) 
settings on the Switch.

PPPoE

This link takes you to screens where you can configure intermediate agent settings in port, 
VLAN, and PPPoE.

Errdisable

This link takes you to screens where you can view errdisable status and configure errdisable 
settings in CPU protection, errdisable detect, and errdisable recovery.

Green Ethernet

This link takes you to a screen where you can configure green Ethernet settings in EEE, auto 
power down, and short reach for each port.

LLDP

This link takes you to screens where you can configure LLDP settings.

IP Application

Static Routing

This link takes you to a screen where you can configure IPv4 static routes. A static route defines 
how the Switch should forward traffic by configuring the TCP/IP parameters manually.

DHCP

This link takes you to screens where you can configure the DHCP settings. 

Table 19   Navigation Panel Links  (continued)

LINK

DESCRIPTION 

Содержание XS1930-10






























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XS1930-10

D-Link AirPlus DWL-810 Owner'S Manual preview
AirPlus DWL-810
Бренд: D-Link Страницы: 25
Falcon 4G COMBO User Manual preview
4G COMBO
Бренд: Falcon Страницы: 24
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Бренд: Paradyne Страницы: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Бренд: Draytek Страницы: 54
Moxa Technologies TAP-125 Series User Manual preview
TAP-125 Series
Бренд: Moxa Technologies Страницы: 51
Paradyne MIM-4000F Installation Instructions Manual preview
MIM-4000F
Бренд: Paradyne Страницы: 6
LevelOne FSW-0808TX Quick Start Manual preview
FSW-0808TX
Бренд: LevelOne Страницы: 3
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Бренд: TP-Link Страницы: 16
DPS KDA 864 User Manual preview
KDA 864
Бренд: DPS Страницы: 57
Dialogic IP Board IPT10000C Quick Install Card preview
IP Board IPT10000C
Бренд: Dialogic Страницы: 2
Buffalo AirStation G54 WLA2-G54 Quick Setup Manual preview
AirStation G54 WLA2-G54
Бренд: Buffalo Страницы: 8
Tripp Lite N002-025-RD Specification Sheet preview
N002-025-RD
Бренд: Tripp Lite Страницы: 3
ZyXEL Communications ONU5100-B22 User Manual preview
ONU5100-B22
Бренд: ZyXEL Communications Страницы: 2
ZyXEL Communications GS1900 Series User Manual preview
GS1900 Series
Бренд: ZyXEL Communications Страницы: 263
ZyXEL Communications NMA1115 User Manual preview
NMA1115
Бренд: ZyXEL Communications Страницы: 28
Paradyne FrameSaver DSL 9783 CSU/DSU User Manual preview
FrameSaver DSL 9783 CSU/DSU
Бренд: Paradyne Страницы: 233
AEG BOF18B2 Original Instructions Manual preview
BOF18B2
Бренд: AEG Страницы: 24
Edimax 3G-6200nL Quick Installation Manual preview
3G-6200nL
Бренд: Edimax Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды