manualshive.com logo in svg

ZyXEL Communications XMG3512-B10A, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications XMG3512-B10A Скачать руководство пользователя страница 153

 Chapter 11 Network Address Translation (NAT)

XMG3512-B10A User’s Guide

153

11.2.1  Add/Edit Port Forwarding 

Click 

Add New Rule 

in the 

Port Forwarding

 screen or click the 

Edit

 icon next to an existing rule to open 

the following screen.

Figure 78   

Port Forwarding: Add/Edit 

The following table describes the labels in this screen. 

Table 56   Port Forwarding: Add/Edit

LABEL

DESCRIPTION

Active

Select to enable or disable the rule.

Service Name

Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on). 

WAN Interface

Select the WAN interface through which the service is forwarded.

You must have already configured a WAN connection with NAT enabled.

Start Port

Enter the original destination port for the packets.

To forward only one port, enter the port number again in the

 End Port 

field. 

To forward a series of ports, enter the start port number here and the end port number in the

 End 

Port 

field.

Содержание XMG3512-B10A






































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды