ZyXEL Communications XGS4600 Series Скачать руководство пользователя страница 62

Страница: 62 / 645

Chapter 5 Initial Setup Example

XGS4600 Series User’s Guide

In the

Static VLAN

screen, select

ACTIVE

, enter a

descriptive name in the

Name

field and enter 2 in the

VLAN Group ID

field for the

VLAN2

network.

Note: The

VLAN Group ID

field in this screen and the

VID

field in the

IP Setup

screen refer to the

same VLAN ID.

Since the

VLAN2

network is connected to port 1 on the Switch, select

Fixed

to configure port 1 to be a

permanent member of the VLAN only.

To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly, clear
the

TX Tagging

check box to set the Switch to remove VLAN tags before sending.

Click

Add

to save the settings to the run-time memory. Settings in the run-time memory are lost when the

Switch’s power is turned off.

5.1.2 Set Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames are
forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 1 so that any untagged frames received on
that port get sent to VLAN 2.

Figure 39

Initial Setup Network Example: Port VID

Содержание XGS4600 Series






































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание XGS4600 Series

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications XGS4600 Series, Руководство пользователя

Результаты поиска

Содержание XGS4600 Series

Отзывы:

Бренды по названию

Популярные бренды