ZyXEL Communications XGS4600 Series, Руководство пользователя

Страница: 460 / 645

Chapter 50 OSPF
XGS4600 Series User’s Guide
460
50.8 IPv4 OSPF Virtual-Links
Configure and view virtual link settings in this screen. See Section 50.1 on page 448 for more information
on OSPF.
In the IPv4 OSPF Configuration screen, click Virtual-Link to display the screen as shown next.
Figure 365 IP Application > OSPF > IPv4 OSPF > Configuration > Virtual-Link
The following table describes the related labels in this screen.
Key ID When the Authentication field displays MD5 , this field displays the identification number of the
key used.
Cost This field displays the interface cost used for calculating the routing table.
Priority This field displays the priority for this OSPF interface.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to begin configuring this screen afresh.
Table 212 IP Application > OSPF > IPv4 OSPF > Configuration > Interface (continued)
LABEL DESCRIPTION
Table 213 IP Application > OSPF > IPv4 OSPF > Configuration > Virtual-Link
LABEL DESCRIPTION
Name Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
Area ID Select the area ID (in an IP address format with dotted decimal notation) of an area to
associate the interface to that area.
Peer Router ID Enter the ID of a peer border router.