ZyXEL Communications XGS4600 Series, Руководство пользователя

Страница: 435 / 645

XGS4600 Series User’s Guide
435
C
HAPTER
47
Static Route
47.1 Static Routing Overview
This chapter shows you how to configure static routes.
The Switch usually uses the default gateway to route outbound traffic from computers on the LAN to the
Internet. To have the Switch send data to devices not reachable through the default gateway, use
static routes.
For example, the next figure shows a computer ( A ) connected to the Switch. The Switch routes most
traffic from A to the Internet through the Switch’s default gateway ( R1 ). You create one static route to
connect to services offered by your ISP behind router R2 . You create another static route to
communicate with a separate network behind a router R3 connected to the Switch.
Figure 347 Example of Static Routing Topology
47.1.1 What You Can Do
• Use the Static Routing screen ( Section 47.2 on page 436 ) to display the link to the IPv4 Static Route
screen.
• Use the IPv4 Static Route screen ( Section 47.3 on page 436 ) to configure and enable an IPv4 static
route.
• Use the IPv6 Static Route screen ( Section 47.4 on page 437 ) to configure and enable an IPv6 static
route.
N1