ZyXEL Communications XGS4600 Series, Руководство пользователя

Страница: 232 / 645

Chapter 21 Classifier
XGS4600 Series User’s Guide
232
21.2 Classifier Status
Use this screen to view the classifiers configured on the Switch and how many times the traffic matches
the rules.
Click Advanced Application > Classifier in the navigation panel to display the configuration screen as
shown.
Figure 183 Advanced Application > Classifier > Classifier Status
The following table describes the labels in this screen.
21.3 Classifier Configuration
Use the Classifier Configuration screen to define the classifiers. After you define the classifier, you can
specify actions (or policy) to act upon the traffic that matches the rules.
In the Classifier Status screen click Classifier Configuration to display the configuration screen as shown.
Table 86 Advanced Application > Classifier > Classifier Status
LABEL DESCRIPTION
Index This field displays the index number of the rule. Click an index number to edit the rule.
Active This field displays Yes when the rule is activated and No when it is deactivated.
Weight This field displays the rule’s weight. This is to indicate a rule’s priority when the match order is set
to
manual in the Classifier > Classifier Configuration > Classifier Global Setting screen.
The higher the number, the higher the rule’s priority.
Name This field displays the descriptive name for this rule. This is for identification purpose only.
Match Count This field displays the number of times a rule is applied. It displays '–' if the rule does not have
count enabled.
Rule This field displays a summary of the classifier rule’s settings.
Any Select Any , then click Clear to clear the matched count for all classifiers.
Classifier Select Classifier , enter a classifier rule name and then click Clear to erase the recorded
statistical information for that classifier, or select Any to clear statistics for all classifiers.
Clear Click Clear to erase the recorded statistical information for the classifier.