manualshive.com logo in svg

ZyXEL Communications XGS2220 Series, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications XGS2220 Series Скачать руководство пользователя страница 599

 Chapter 79 Networked AV Mode

XGS2220 Series User’s Guide

599

Figure 445   

Shared Server Using VLAN Example

IEEE 802.1Q Tagged VLANs

A tagged VLAN uses an explicit tag (VLAN ID) in the MAC header to identify the VLAN membership of a 
frame across bridges 

–

 they are not confined to the switch on which they were created. The VLANs can 

be created statically by hand dynamically through GVRP. The VLAN ID associates a frame with a 
specific VLAN and provides the information that switches need to process the frame across the network. 
A tagged frame is 4 bytes longer than an untagged frame and contains 2 bytes of TPID (Tag Protocol 
Identifier, residing within the type or length field of the Ethernet frame) and 2 bytes of TCI (Tag Control 
Information, starts after the source address field of the Ethernet frame).

The CFI (Canonical Format Indicator) is a single-bit flag, always set to zero for Ethernet switches. If a 
frame received at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to 
an untagged port. The remaining twelve bits define the VLAN ID, giving a possible maximum number of 
4,096 VLANs. Note that user priority and VLAN ID are independent of each other. A frame with VID 
(VLAN Identifier) of null (0) is called a priority frame, meaning that only the priority level is significant and 
the default VID of the ingress port is given as the VID of the frame. Of the 4,096 possible VIDs, a VID of 0 is 
used to identify priority frames and value 4095 (FFF) is reserved, so the maximum possible VLAN 
configurations are 4,094.

Forwarding Tagged and Untagged Frames

Each port on the Switch is capable of passing tagged or untagged frames. To forward a frame from an 
802.1Q VLAN-aware switch to an 802.1Q VLAN-unaware switch, the Switch first decides where to 
forward the frame and then strips off the VLAN tag. To forward a frame from an 802.1Q VLAN-unaware 
switch to an 802.1Q VLAN-aware switch, the Switch first decides where to forward the frame, and then 
inserts a VLAN tag reflecting the ingress port's default VID. The default PVID is VLAN 1 for all ports, but this 
can be changed.

TPID 

2 Bytes

User Priority 

3 Bits

CFI

1 Bit

VLAN ID

12 bits

Содержание XGS2220 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды