ZyXEL Communications XGS2220 Series, Руководство пользователя

Страница: 578 / 655

Chapter 79 Networked AV Mode
XGS2220 Series User’s Guide
578
79.20 Link Aggregation Setting
Use the Link Aggregation Setting screen to enable static link. Link aggregation (trunking) is the grouping
of physical ports into one logical higher-capacity link. You may want to trunk ports if for example, it is
cheaper to use multiple lower-speed links than to under-utilize a high-speed, but more costly, single-port
link. However, the more ports you aggregate then the fewer available ports you have. A trunk group is
one logical link containing multiple ports.
Click PORT > Link Aggregation > Link Aggregation Setting to display the screen shown next.
Figure 431 PORT > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 335 PORT> Link Aggregation > Link Aggregation Setting
LABEL DESCRIPTION
This is the only screen you need to configure to enable static link aggregation.
Group ID The field identifies the link aggregation group, that is, one logical link containing multiple ports.
Active Select this to activate a trunk group.