manualshive.com logo in svg

ZyXEL Communications XGS-4528F, Руководство пользователя, Страница: 478 / 491

Поделиться
Скачать
ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 478

Appendix B Legal Information

XGS-4526/4528F/4728F User’s Guide

478

• This device must accept any interference received, including interference that 

may cause undesired operations.

FCC Warning

This device has been tested and found to comply with the limits for a Class A 
digital switch, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a commercial 
environment. This device generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications. Operation of this device in a 
residential area is likely to cause harmful interference in which case the user will 
be required to correct the interference at his own expense.

CE Mark Warning:

This is a class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures.

Taiwanese BSMI (Bureau of Standards, Metrology and Inspection) A 
Warning: 

Notices 

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du 
Canada.

CLASS 1 LASER PRODUCT 

APPAREIL A LASER DE CLASS 1 

PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11.

PRODUIT CONFORME SELON 21 CFR 1040.10 ET 1040.11. 

Содержание XGS-4528F












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов