ZyXEL Communications XGS-4528F, Руководство пользователя, Страница: 395 / 491

Chapter 45 Maintenance
XGS-4526/4528F/4728F User’s Guide
395
6
Use
put
to transfer files from the computer to the Switch, for example,
put
firmware.bin ras
transfers the firmware on your computer (firmware.bin) to the
Switch and renames it to “ras”. Similarly,
put config.cfg config
transfers the
configuration file on your computer (config.cfg) to the Switch and renames it to
“config”. Likewise
get config config.cfg
transfers the configuration file on the
Switch to your computer and renames it to “config.cfg”. See Table 142 on page
394 for more information on filename conventions.
7
Enter
quit
to exit the ftp prompt.
45.8.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-
based FTP clients.
45.8.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Service Access Control screen.
• The IP address(es) in the Remote Management screen does not match the
client IP address. If it does not match, the Switch will disconnect the FTP session
immediately.
Table 143 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to
the server for anonymous access. Anonymous logins will work only
if your ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary
mode.
Initial Remote
Directory Specify the default remote directory (path).
Initial Local
Directory Specify the default local directory (path).