ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 31

Страница: 31 / 491

Chapter 1 Getting to Know Your Switch

XGS-4526/4528F/4728F User’s Guide

• Web Configurator. This is recommended for everyday management of the Switch

using a (supported) web browser. See

Chapter 4 on page 47

• Command Line Interface. Line commands offer an alternative to the Web

Configurator and may be necessary to configure advanced features. See the CLI

Reference Guide.

• FTP. Use File Transfer Protocol for firmware upgrades and configuration backup/

restore. See

Section 45.8 on page 393

• SNMP. The device can be monitored and/or managed by an SNMP manager. See

Section 46.3 on page 398

1.3 Good Habits for Managing the Switch

Do the following things regularly to make the Switch more secure and to manage
the Switch more effectively.

• Change the password. Use a password that’s not easy to guess and that consists

of different types of characters, such as numbers and letters.

• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it).

Restoring an earlier working configuration may be useful if the device becomes

unstable or even crashes. If you forget your password, you will have to reset the

Switch to its factory default settings. If you backed up an earlier configuration

file, you would not have to totally re-configure the Switch. You could simply

restore your last configuration.

Содержание XGS-4528F












































































































































































































































































































































































































































































































Результаты поиска

Содержание XGS-4528F

Отзывы:

ZyXEL Communications XGS-4528F, Руководство пользователя, Страница: 31 / 491

Результаты поиска

Содержание XGS-4528F

Отзывы: