ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 254 | Manualshive

Страница: 254 / 491

ZyXEL Communications XGS-4528F Скачать руководство пользователя страница 254

Chapter 25 AAA

XGS-4526/4528F/4728F User’s Guide

254

25.3 Supported RADIUS Attributes

Remote Authentication Dial-In User Service (RADIUS) attributes are data used to
define specific authentication, and accounting elements in a user profile, which is
stored on the RADIUS server. This section lists the RADIUS attributes supported
by the Switch.

Refer to RFC 2865 for more information about RADIUS attributes used for
authentication. Refer to RFC 2866 and RFC 2869 for RADIUS attributes used for
accounting.

This section lists the attributes used by authentication and accounting functions on
the Switch. In cases where the attribute has a specific format associated with it,
the format is specified.

25.3.1 Attributes Used for Authentication

The following sections list the attributes sent from the Switch to the RADIUS
server when performing authentication.

25.3.1.1 Attributes Used for Authenticating Privilege Access

User-Name

- the format of the User-Name attribute is $enab#$, where # is the privilege

level (1-14)

User-Password
NAS-Identifier
NAS-IP-Address

25.3.1.2 Attributes Used to Login Users

User-Name
User-Password
NAS-Identifier
NAS-IP-Address

25.3.1.3 Attributes Used by the IEEE 802.1x Authentication

User-Name
NAS-Identifier
NAS-IP-Address
NAS-Port
NAS-Port-Type

«
...
252
253
254
255
256
...
»

Содержание XGS-4528F












































































































































































































































































































































































































































































































Отзывы:

Нет отзывов