Chapter 1 Introduction
WX Series User’s Guide
12
1.1.2 How to set up the WX Device
The WX Device can function as a Repeater or an Access Point (AP).
Set your WX Device to
Repeater
(RP) mode, if you want to connect an existing WiFi network through
another Access Point and also provide network connection to WiFi clients. In this mode, the WX Device
can be an access point and a WiFi client at the same time. If the WX Device has a WiFi uplink
connection, it is in RP mode.
In the following figure, the WX Device (
A
) is in
Repeater
(RP) mode and is letting a WiFi client connect to
the network wirelessly through a router (
B
). This helps you expand WiFi coverage when you already have
an access point or wireless router in your network.
Figure 1
Device Operation Mode Example: Repeater Mode
Set your WX Device to
Access Point
(AP) mode
if you already have a router in your network and you
want to bridge a wired network (LAN) and another LAN or wireless LAN (WLAN) in the same subnet. If the
WX Device has a wired uplink connection, it is in AP mode.
In
the following figure
, the WX Device (
A
) is in
Access Point
(AP) mode, and
is bridging a wired
network and a wired LAN in the same subnet.
Figure 2
Device Operation Mode Example: AP Mode
The WX Device can use both 2.4 GHz and 5 GHz networks at the same time. For more information on
dual-band WiFi, see
You can add more WX Devices to your network to form a daisy chain. For more information, see
.
Set up a Mesh network with your WX Device to use band steering, AP steering, auto-configuration and
other advanced features for your WiFi network. For more information, see
.
Содержание WX3100-TO
Страница 10: ...10 PART I User s Guide ...
Страница 37: ...37 PART II Technical Reference ...
Страница 149: ...Chapter 17 Backup Restore WX Series User s Guide 149 Figure 82 Maintenance Reboot ...
