ZyXEL Communications WRE6606, Руководство пользователя, Страница: 32 / 144

Chapter 6 Repeater Mode
WRE6606 User’s Guide
32
6.3 What You Need to Know
With the exception of the AP Select and System Mode screen, other configuration screens in
Repeater mode are similar to the ones in Access Point Mode. See Chapter 3 on page 19 of this
User’s Guide.
6.3.1 Setting your WRE6606 to Repeater Mode
1
To use your WRE6606 as a repeater, see Section 3.1.1.1 on page 20 .
2
Connect your computer to the LAN port of the WRE6606.
3
Open a web browser such as Internet Explorer and type “http://zyxelsetup” or “http://192.168.1.2”
as the web address in your web browser.
4
Enter “1234” (default) as the password and click Login .
5
Type a new password and retype it to confirm, then click Apply . Otherwise, click Ignore .
Note: You have to log in to the Web Configurator again when you change modes. As soon
as you do, your WRE6606 is already in Repeater mode.
Note: If a client is connected to the WRE6606 through the wired Ethernet connection, the
client can only access the 2.4 GHz Wi-Fi. In the following figure, the LAN Client is
only able to communicate with devices in the 2.4 GHz wireless network.
Figure 17
Repeater Mode Overview
6.3.2 Configuring your WLAN, LAN and Maintenance Settings
• See Chapter 10 on page 56 and Chapter 11 on page 78 for information on configuring your
wireless network and LAN settings.
• See Chapter 13 on page 82 for information on configuring your Maintenance settings.
WRE
LAN Client
5 GHz
5 GHz AP
5 GHz
5 GHz
2.4 GHz AP
2.4 GHz 2.4 GHz
2.4 GHz