ZyXEL Communications WRE6605, Руководство пользователя, Страница: 9 / 54

Chapter 1 Introduction
WRE6605 User’s Guide
9
• Easy Link App. Use Easy Link to learn how to install your WRE6605 in AP mode and/or Repeater mode,
check your signal strength and modify wireless settings. You can download the Easy Link app from the
Google Play Store or Apple store. Use this method when you are connecting the WRE6605 (in
repeater mode) to a wireless router or AP that doesn't support WPS. Scan the QR code below to
download the Easy Link app.
Note: WPS allows you to quickly set up a WiFi network with strong security, without having to
configure security settings manually. Each WPS connection works between two
devices. Both devices must support WPS (check each device’s documentation to
make sure).
Figure 2 Easy Link QR Code
• Web Configurator. Use a supported web browser to manage the WRE6605. You can also use this
method when you are connecting the WRE6605 (in repeater mode) to a wireless router or AP that
doesn't support WPS.
1.3 Securing the WRE6605
Do the following things regularly to make the WRE6605 more secure and to manage the WRE6605 more
effectively.
• Change the password. Use a password that’s not easy to guess and that consists of different types of
characters, such as numbers and letters.
• Write down the password and put it in a safe place.
1.4 Resetting the WRE6605
If you forget your password or IP address, or you cannot access the Web Configurator, you will need to
use the Smart Push Button at the bottom of the WRE6605 to reload the factory-default configuration file.
This means that you will lose all configurations that you had previously saved, the password will be reset,
and the IP address will be reset to “192.168.1.2”. Follow these steps to reset the WRE6605:
• Make sure the power LED is on.
• Press and hold the Smart Push Button for more than 10 seconds.
• Release the Smart Push Button, the power LED begins flashing. The WRE6605 reloads factory-default
settings and begins to reboot.