ZyXEL Communications WRE6505 v2 страница 129 Скачать руководство пользователя

Страница: 129 / 132

Appendix C Legal Information

WRE6505 v2 User’s Guide

129

Explanation of the Symbols

Viewing Certifications

Go to

http://www.zyxel.com

to view this product’s documentation and certifications.

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific

period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the

authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of

purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or

replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to

restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally

equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has

been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other

warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in

no event be held liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought

the device at http://www.zyxel.com/web/support_warranty_info.php.

Registration

Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at

www.us.zyxel.com for North American products.

Open Source Licenses

This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are

provided with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under

those Licenses, please contact [email protected] to get it.

SYMBOL

EXPLANATION

Alternating current (AC):

AC is an electric current in which the flow of electric charge periodically reverses direction.

Direct current (DC):

DC if the unidirectional flow or movement of electric charge carriers.

Earth; ground:

A wiring terminal intended for connection of a Protective Earthing Conductor.

Class II equipment:

The method of protection against electric shock in the case of class II equipment is either double insulation

or reinforced insulation.

Содержание WRE6505 v2





































































































































Результаты поиска

Содержание WRE6505 v2

Отзывы:

Похожие инструкции для WRE6505 v2

Бренды по названию

Популярные бренды

ZyXEL Communications WRE6505 v2, Руководство пользователя

Результаты поиска

Содержание WRE6505 v2

Отзывы:

Похожие инструкции для WRE6505 v2

Бренды по названию

Популярные бренды