ZyXEL Communications WRE 2205 Скачать руководство пользователя

Страница: 63 / 74

Chapter 10 Troubleshooting

WRE2205 User’s Guide

• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for

don’t know the IP address of my WRE2205.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.

Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
enabled.

Make sure your computer is in the same subnet as the WRE2205. (If you know that there are
routers between your computer and the WRE2205, skip this step.)

• If there is a DHCP server on your network, make sure your computer is using a dynamic IP

address.

• If there is no DHCP server on your network, make sure your computer’s IP address is in the

same subnet as the WRE2205.

Reset the device to its factory defaults, and try to access the WRE2205 with the default IP address.

If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.

Advanced Suggestions

• If your computer is connected wirelessly, use a computer that is connected to a

LAN

ETHERNET

port.

I can see the

Login

screen, but I cannot log in to the WRE2205.

Make sure you have entered the password correctly. The default username is

admin

and default

password is

1234

. This field is case-sensitive, so make sure [Caps Lock] is not on.

This can happen when you fail to log out properly from your last session. Try logging in again after
5 minutes.

Disconnect and re-connect the power adaptor or cord to the WRE2205.

If this does not work, you have to reset the device to its factory defaults. See

Section 10.4 on page

10.3 Internet Access

I cannot access the Internet.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide.

Содержание WRE 2205











































































Результаты поиска

Содержание WRE 2205

Отзывы:

Похожие инструкции для WRE 2205

Бренды по названию

Популярные бренды

ZyXEL Communications WRE 2205, Руководство пользователя

Результаты поиска

Содержание WRE 2205

Отзывы:

Похожие инструкции для WRE 2205

Бренды по названию

Популярные бренды