ZyXEL Communications WRE 2205, Руководство пользователя

Страница: 47 / 74

Chapter 6 Wireless LAN
WRE2205 User’s Guide
47
Figure 33
Network > Wireless LAN > WPS
The following table describes the labels in this screen.
6.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN > WPS Station tab.
Note: Note: After you click Push Button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Table 17
Network > Wireless LAN > WPS
LABEL DESCRIPTION
WPS Setup
Enable WPS Select this to enable the WPS feature.
PIN Number This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
WPS Status
Status This displays Configured when the WRE2205 has connected to a wireless network using
WPS or when Enable WPS is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the WRE2205 or you click Release_Configuration to remove the
configured wireless and wireless security settings.
Release
Configuration This button is only available when the WPS status displays Configured .
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the WRE2205.
Apply Click Apply to save your changes back to the WRE2205.
Refresh Click Refresh to get this screen information afresh.