background image

 Chapter 3 Easy Mode

WAP6906 User’s Guide

23

Figure 6   

Navigation Panel 

The following table describes the labels in this screen.

3.3  Network Map

Note: Don’t worry if the Network Map does not display in your web browser. This feature may 

not be supported by your system. You can still configure your WAP6906’s features in the 

Expert Mode.

When you log in to the Web Configurator, the 

Network Map

 is shown as follows.

Figure 7   

Network Map

The line connecting the WAP6906 to the gateway becomes green when the WAP6906 is able to ping 
the gateway. It becomes red when the ping initiating from the WAP6906 does not get a response from 
the gateway. The same rule applies to the line connecting the gateway to the Internet.

You can also view the devices (represented by icons indicating the kind of network device, such as 
Android device, iOS device or Windows OS) connected to the WAP6906, including those connecting 
wirelessly. Right-click on the 

Refresh

 button located on the WAP6906 icon to refresh the network map. 

Click on a device’s name to view information about the device.

Table 3   Navigation Panel

LABEL

DESCRIPTION

Logout

Click this to end the Web Configurator session.

Expert Mode

Click this to change to 

Expert Mode

 and customize features of the WAP6906.

Содержание WAP6906




































































































Отзывы: