ZyXEL Communications WAP6804, Руководство пользователя

Страница: 70 / 114

Chapter 12 AP Connection
WAP6804 User’s Guide
70
Figure 39 Networking > AP Connection > Basic (Client Mode)
Figure 40 Networking > AP Connection > Station (Repeater Mode)
The following table describes the general wireless LAN labels in this screen.
12.4 Advance AP Connection Screen
Use this screen to configure the advanced wireless settings for the wireless connection between your
WAP6804 and the wireless network.
Click Networking > AP Connection > Advanced . The screen appears as shown.
Table 26 Networking > AP Connection > Basic/Station
LABEL DESCRIPTION
Enable Click the check box to allow your WAP6804 to connect to an AP through a wireless connection.
This field is not displayed in the Repeater mode.
Network
Name(SSID) Enter the name of the wireless network to which the WAP6804 is connecting
Connection
Status This shows whether the WAP6804 is already connected, attempting to connect, or not
connected to a wireless network.
Encryption Select the data encryption method the wireless network uses.
Pre-Shared Key Enter the password that the WAP6804 uses to connect to the wireless network.
Apply Click Apply to save your changes back to the WAP6804.
Cancel Click Cancel to reload the previous configuration for this screen.