ZyXEL Communications WAP6804, Руководство пользователя

Страница: 44 / 114

Chapter 8 Tutorials
WAP6804 User’s Guide
44
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the WAP6804’s interface. See Section 8.3.2 on page 45 . This is the more
secure method, since one device can authenticate the other.
8.3.1 Push Button Configuration (PBC)
The push button configuration function found in the interfaces is available both in AP mode and
Repeater mode. The WPS button, see
Section 1.3 on page 11 , can also be used for PBC configurations in
either AP or Repeater mode.
1
Make sure that your WAP6804 is turned on and set to work in AP mode and that it is within range of the
wireless client.
2
Go to your phone settings and turn on WiFi. Open the WiFi networks list and tap WPS Push Button or the
WPS icon ( ).
3
Log into WAP6804’s Web Configurator. Make sure WPS is enabled in the Networking > Wireless Network
2.4G or Wireless Network 5G > WPS screen.
4
Navigate to Networking > Wireless Network 2.4G or Wireless Network 5G > WPS and press the Push
Button .
Note: Your WAP6804 has a WPS button located on its panel, as well as a WPS button in its
configuration utility. Both buttons have exactly the same function; you can use one or
the other.
Note: It doesn’t matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The WAP6804 sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the WAP6804 securely.
The following figure shows you how to set up wireless network and security by pressing a button on both
WAP6804 and wireless client (the Android smartphone in this example).