ZyXEL Communications WAP5805, Руководство пользователя

Страница: 71 / 125

Chapter 10 Maintenance
WAP5805 User’s Guide
71
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default WAP5805
IP address. See Appendix A on page 77 for details on how to set up your computer’s
IP address.
10.8 Restart Screen
System restart allows you to reboot the WAP5805 without turning the power off.
Click Maintenance > Restart to open the following screen.
Figure 49
Maintenance > Restart
Click Restart to have the WAP5805 reboot. This does not affect the WAP5805's configuration.
10.9 Language
Language selection allows you to choose your preferred language.
Click Maintenance > Language to open the following screen.
Figure 50
Maintenance > Language
The following table describes the labels in this screen.
Table 34
Maintenance > Language
LABEL DESCRIPTION
Language
selection Choose from the drop-box your preferred language.
Apply Click Apply to save your changes back to the WAP5805.
Cancel Click Cancel to discard the changes.