ZyXEL Communications WAP5805, Руководство пользователя

Страница: 63 / 125

Chapter 9 LAN
WAP5805 User’s Guide
63
Alias IP allows you the access the WAP5805 from the local side from the following addresses:
• AP mode: alias IP address of 192.168.100.2 with subnet mask of 255.255.255.0 (24 bits)
• Client mode: alias IP address of 192.168.100.10 with subnet mask of 255.255.255.0 (24 bits)
To access the WAP5805 from the Internet side, you have to use the dynamically assigned IP
address.
9.4 LAN IP Screen
Use this screen to change the IP address for your WAP5805. Click Configuration > Network >
LAN > IP .
Figure 41
Configuration > Network > LAN > IP
The following table describes the labels in this screen.
Table 27
Configuration > Network > LAN > IP
LABEL DESCRIPTION
IP Address
Obtain an IP
Address
Automatically Click this to obtain an IP address automatically.
Static IP Address Click this if you want a static IP address.
IP Address Type the IP address in dotted decimal notation. If you change the IP address you will
have to log in again with the new IP address.
Subnet Mask The subnet mask specifies the network number portion of an IP address.
Gateway IP
Address Enter a gateway IP address (if your ISP or network administrator gave you one) in this
field.
Apply Click Apply to save your changes back to the WAP5805.
Cancel Click Cancel to reload the previous configuration for this screen.