![ZyXEL Communications wap3205 V3 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/zyxel-communications/wap3205-v3/wap3205-v3_user-manual_945970022.webp)
Chapter 3 Connection Wizard
WAP3205 v3 User’s Guide
22
Figure 8
Wizard Setup - General> System Operation Mode
The following table describes the labels in this screen.
Note: After choosing an operating mode, the next screen will vary according to the mode
you have selected. If you have selected an operating mode different than the current
mode, your WAP3205 v3 will restart.
3.4 Connection Wizard - Access Point Mode
The WAP3205 v3’s system operation mode is set to access point mode by default. In this mode your
WAP3205 v3 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet.
3.4.1 WLAN Setup
The following screen will open. Use this screen to configure the WAP3205 v3’s wireless network settings.
Figure 9
Connection Wizard - Access Point Mode> WLAN Setup
Table 3 Wizard Setup - General> System Operation Mode
LABEL
DESCRIPTION
Access Point
Select
Access Point
to allow wireless devices to communicate with a wired
network.
Universal Repeater
Select
Universal Repeater
to transmit traffic between two wireless networks.
Client Bridge
Select
Client Bridge
to connect your WAP3205 v3 to an existing network via an
access point.
Apply
Click
Apply
to save the changes to your WAP3205 v3.
Reset
Click
Reset
to reload the previous configuration of this screen.
Содержание wap3205 V3
