ZyXEL Communications wap3205 V3, Руководство пользователя

Страница: 18 / 165

Chapter 2 The Web Configurator
WAP3205 v3 User’s Guide
18
3
After creating your Static IP profile, make sure it is selected, then click on the Configure IPv4 scroll button
and select Manually . Then modify your IP Address, your computer must be in the same subnet in order to
access this website address.You must give it a fixed IP address in the range between 192.168.1.3 and
192.168.1.254. Then type 255.255.255.0 as your subnet mask, and click
Apply to save your changes.
Note: After you have configured your WAP3205 v3, you must remember to change your static
IP back to obtaining it automatically to be able to access the Internet. If you want to
change the IP address to automatic (default) repeat step 1, then on Location select
Automatic or a different profile you have configured.
2.3 Accessing the Web Configurator
1
Make sure your WAP3205 v3 hardware is properly connected and prepare your computer or computer
network to connect to the WAP3205 v3 (refer to the Quick Start Guide).
2
Launch your web browser.
3
Type the WAP3205 v3’s default address “http://192.168.1.2 to access any of the modes.
Your computer must be in the same subnet in order to access this website address.You must give it a
fixed IP address in the range between 192.168.1.3 and 192.168.1.254 (see
Section 2.2 on page 14 ).
4
Type admin (default) as the user name and 1234 (default) as the password and click Login .