Chapter 11 WiFi
WAH7601 User’s Guide
71
The following table describes the labels in this screen.
11.3 WPS Settings
Use this screen to configure WiFi Protected Setup (WPS) on your WAH7601.
Table 26 Configuration > WiFi > Basic
LABEL
DESCRIPTION
Enable
Select the check box to enable the wireless LAN of the WAH7601.
Mode
Select the IEEE 802.11 mode from the following:
•
802.11 B only
: to allow only IEEE 802.11b compliant WLAN devices to associate with the
WAH7601.
•
802.11 B/G mixed
: to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to
associate with the WAH7601. The transmission rate of your WAH7601 might be reduced.
•
802.11 B/G/N mixed
: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN
devices to associate with the WAH7601. The transmission rate of your WAH7601 might be
reduced.
•
802.11 G only
: to allow only IEEE 802.11g compliant WLAN devices to associate with the
WAH7601.
•
802.11 N only
: to allow only IEEE 802.11n compliant WLAN devices to associate with the
WAH7601.
Channel
Set the channel depending on your particular region.
Select a channel or use
Auto
to have the WAH7601 automatically determine a channel to use. If
you are having problems with wireless interference, changing the channel may help. Try to use a
channel that is as many channels away from any channels used by neighboring APs as possible.
The channel number which the WAH7601 is currently using then displays next to this field.
WiFi Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated.
Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name for WiFi.
Hide SSID
Select the check box to hide the SSID in the outgoing beacon frame so a station cannot obtain
the SSID through scanning using a site survey tool.
MAX Clients
Select a number to specify maximum client the Guest WiFi network can use. Click
Apply
to save
your changes.
Encryption Type
Select
WPA Personal
to add security on this wireless network. The wireless clients which want to
associate to this network must have same wireless security settings as the WAH7601. When you
select to use a security, additional options appear in this screen.
Or you can select
None
to allow any client to associate this network without any data
encryption or authentication.
WPA Mode
This field appears when you select
WPA Personal
in the
Encryption Type
field.
Select
Auto
to allow wireless devices that support either WPA or WPA2 to connect to your
WAH7601’s wireless network.
Select
WPA2
to allow only wireless devices that support WPA2 to connect to your WAH7601’s
wireless network.
Cipher Type
Select the encryption type (
AES, TKIP
or
TKIP and AES
) for data encryption.
Select
AES
if your wireless clients can all use
AES-CCMP
.
Select
TKIP
if your wireless clients can all use
TKIP
.
Select
TKIP and AES
to allow the wireless clients to use either
TKIP
or
AES
.
Key
Enter the key used for authentication the wireless clients must use to connect to the WAH7601.
Apply
Click
Apply
to save your changes back to the WAH7601.
Содержание WAH7601
Страница 13: ...14 PART I User s Guide...
Страница 30: ...31 PART II Technical Reference...
Страница 93: ...103 PART III Troubleshooting and Appendices...
