manualshive.com logo in svg

ZyXEL Communications VWG1312-B10A, Руководство пользователя, Страница: 56 / 378

Поделиться
Скачать
ZyXEL Communications VWG1312-B10A Скачать руководство пользователя страница 56

Chapter 4 Tutorials

VMG1312-B10A User’s Guide

56

4.7.2  Configuring DDNS on Your Device

Configure the following settings in the Network Setting > DNS > Dynamic DNS screen.

• Select Enable Dynamic DNS.
• Select www.DynDNS.com as the service provider.
• Type zyxelrouter.dyndns.org in the Host Name field.
• Enter the user name (UserName1) and password (12345).

Click Apply.

4.7.3  Testing the DDNS Setting

Now you should be able to access the Device from the Internet. To test this:

1

Open a web browser on the computer (using the IP address a.b.c.d) that is connected to the 
Internet.

2

Type http://zyxelrouter.dyndns.org and press [Enter].

3

The Device’s login page should appear. You can then log into the Device and manage it.

Содержание VWG1312-B10A



























































































































































































































































































































































































Отзывы:

Нет отзывов