ZyXEL Communications VMG1312-B10C, Руководство пользователя

Страница: 246 / 294

Chapter 29 TR-069 Client
VMG1312-B10C User’s Guide
246
The following table describes the fields in this screen.
Table 108
Maintenance > TR-069 Client
LABEL DESCRIPTION
Inform Select Enable for the Device to send periodic inform via TR-069 on the WAN. Otherwise,
select Disable .
Inform Interval Enter the time interval (in seconds) at which the Device sends information to the auto-
configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.
WAN Interface
used by TR-069
client Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN , you should also select the pre-configured WAN connection(s).
Display SOAP
messages on
serial console Select Enable to show the SOAP messages on the console.
Connection
Request
Authentication Select this option to enable authentication when there is a connection request from the ACS.
Connection
Request User
Name Enter the connection request user name.
When the ACS makes a connection request to the Device, this user name is used to
authenticate the ACS.
Connection
Request
Password Enter the connection request password.
When the ACS makes a connection request to the Device, this password is used to
authenticate the ACS.
Connection
Request URL This shows the connection request URL.
The ACS can use this URL to make a connection request to the Device.
Local certificate
used by TR-069
client You can choose a local certificate used by TR-069 client. The local certificate should be
imported in the
Security > Certificates > Local Certificates screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.