ZyXEL Communications VDSL SWITCH VES-1616F-3X, Руководство пользователя

Страница: 141 / 310

Chapter 20 VLAN Stacking
VES-1616F-3x Series User’s Guide
141
20.3 VLAN Tag Format
A VLAN tag (service provider VLAN stacking or customer IEEE 802.1Q) consists of the
following three fields.
Type is a standard Ethernet type code identifying the frame and indicates that whether the
frame carries IEEE 802.1Q tag information. SP TPID (Service Provider Tag Protocol
Identifier) is the service provider VLAN stacking tag type. Many vendors use 0x8100 or
0x9100.
TPID (Tag Protocol Identifier) is the customer IEEE 802.1Q tag.
• If the VLAN stacking port role is Access Port , then the switch adds the SP TPID tag to all
incoming frames on the service provider's edge devices (1 and 2 in the VLAN stacking
example figure).
• If the VLAN stacking port role is Tunnel Port , then the switch only adds the SP TPID tag
to all incoming frames on the service provider's edge devices (1 and 2 in the VLAN
stacking example figure) that have an
SP TPID different to the one configured on the
switch. (If an incoming frame’s SP TPID is the same as the one configured on the switch,
then the switch will not add the tag.)
Priority refers to the IEEE 802.1p standard that allows the service provider to prioritize traffic
based on the class of service (CoS) the customer has paid for.
• On the switch, configure priority level of inner IEEE 802.1Q tag in the Port Setup screen.
• "0" is the lowest priority level and "7" is the highest.
VID is the VLAN ID. SP VID is the VID for the second (service provider’s) VLAN tag.
20.3.1 Frame Format
The frame format for an untagged Ethernet frame, a single-tagged 802.1Q frame (customer)
and a “double-tagged” 802.1Q frame (service provider) is shown next.
Configure the fields as circled in the switch
VLAN Stacking screen.
Table 44 VLAN Tag Format
Type Priority VID
Table 45 Single and Double Tagged 802.11Q Frame Format
DA SA Len/
Etype
Data FCS Untagged
Ethernet frame
DA SA TPID Priorit
y
VID Len/
Etype
Data FCS IEEE 802.1Q
customer
tagged frame
DA SA SPTPI
D
Priority VID TPID Priorit
y
VID Len/
Etype
Data FCS Double-tagged
frame
Table 46 IEEE 802.1Q Frame
DA Destination Address Priority 802.1p Priority
SA Source Address Len/
Etype
Length and type of
Ethernet frame