ZyXEL Communications Unified Security Gateway ZyWALL 300, Руководство пользователя

Страница: 637 / 1156

Chapter 35 ADP
ZyWALL USG 300 User’s Guide
637
35.3.5 Protocol Anomaly Profiles
Protocol anomaly is the third screen in an ADP profile. Protocol anomaly (PA) rules
check for protocol compliance against the relevant RFC (Request for Comments).
Protocol anomaly detection includes HTTP Inspection, TCP Decoder, UDP Decoder,
and ICMP Decoder where each category reflects the packet type inspected.
Protocol anomaly rules may be updated when you upload new firmware.
35.3.6 Protocol Anomaly Configuration
In the
Configuration > Anti-X > ADP > Profile
screen, click the
Edit
icon or
click the
Add
icon and choose a base profile, then select the
Protocol Anomaly
tab. If you made changes to other screens belonging to this profile, make sure you
have clicked
OK
or
Save
to save the changes before selecting the
Protocol
Anomaly
tab.
Name This is the name of the traffic anomaly rule. Click the Name column
heading to sort in ascending or descending order according to the rule
name.
Log These are the log options. To edit this, select an item and use the Log
icon.
Action This is the action the ZyWALL should take when a packet matches a rule.
To edit this, select an item and use the Action icon.
Threshold For flood detection you can set the number of detected flood packets per
second that causes the ZyWALL to take the configured action.
OK Click
OK
to save your settings to the ZyWALL, complete the profile and
return to the profile summary page.
Cancel Click Cancel to return to the profile summary page without saving any
changes.
Save Click
Save
to save the configuration to the ZyWALL but remain in the
same page. You may then go to the another profile screen (tab) in order
to complete the profile. Click
OK
in the final profile screen to complete
the profile.
Table 174 Configuration > ADP > Profile > Traffic Anomaly (continued)
LABEL DESCRIPTION