ZyXEL Communications Unified Security Gateway ZyWALL 300, Руководство пользователя

Страница: 634 / 1156

Chapter 35 ADP
ZyWALL USG 300 User’s Guide
634
The following table describes the fields in this screen.
35.3.3 Creating New ADP Profiles
You may want to create a new profile if not all rules in a base profile are applicable
to your network. In this case you should disable non-applicable rules so as to
improve ZyWALL ADP processing efficiency.
You may also find that certain rules are triggering too many false positives or false
negatives. A false positive is when valid traffic is flagged as an attack. A false
negative is when invalid traffic is wrongly allowed to pass through the ZyWALL. As
each network is different, false positives and false negatives are common on initial
ADP deployment.
You could create a new ‘monitor profile’ that creates logs but all actions are
disabled. Observe the logs over time and try to eliminate the causes of the false
alarms. When you’re satisfied that they have been reduced to an acceptable level,
you could then create an ‘inline profile’ whereby you configure appropriate actions
to be taken when a packet matches a rule.
ADP profiles consist of traffic anomaly profiles and protocol anomaly profiles. To
create a new profile, select a base profile (see
Table 172 on page 633 ) and then
click
OK
to go to the profile details screen. Type a new profile name, enable or
disable individual rules and then edit the default log options and actions.
35.3.4 Traffic Anomaly Profiles
The traffic anomaly screen is the second screen in an ADP profile. Traffic anomaly
detection looks for abnormal behavior such as scan or flooding attempts. In the
Configuration > Anti-X > ADP > Profile
screen, click the
Edit
icon or click the
Add icon and choose a base profile. If you made changes to other screens
Table 173 Anti-X > ADP > Profile
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
# This is the entry’s index number in the list.
Name This is the name of the profile you created.
Base Profile This is the base profile from which the profile was created.