manualshive.com logo in svg

ZyXEL Communications UAG5100, Руководство пользователя, Страница: 92 / 505

Поделиться
Скачать
ZyXEL Communications UAG5100 Скачать руководство пользователя страница 92

Chapter 7 Monitor

UAG5100 User’s Guide

92

7.11  The Dynamic Guest Screen 

Dynamic guest accounts can be automatically generated for guest users by using a connected 
statement printer or the web configurator with the guest-manager account (see 

Section 26.3.1 on 

page 263

 for more information). A dynamic guest account has a dynamically-created user name 

and password. Guest users can log in with the dynamic guest accounts when connecting to an SSID 
for a specified time unit. Use this screen to look at a list of dynamic guest user accounts on the 
UAG’s local database. To access this screen, click Monitor > System Status > Dynamic Guest.

Figure 62   

Monitor > System Status > Dynamic Guest

Status

Ready - you can have the UAG use the USB storage device. 

Click Remove Now to stop the UAG from using the USB storage device so you can 
remove it. 

Unused - the connected USB storage device was manually unmounted by using the 
Remove Now button or for some reason the UAG cannot mount it. 

Click Use It to have the UAG mount a connected USB storage device. This button is 
grayed out if the file system is not supported (unknown) by the UAG.

none -  no USB storage device is connected.

Detail

This field displays any other information the UAG retrieves from the USB storage 
device. 

Deactivated - the use of a USB storage device is disabled (turned off) on the UAG.

OutofSpace - the available disk space is less than the disk space full threshold (see 

Section 41.2 on page 395

 for how to configure this threshold).

Mounting - the UAG is mounting the USB storage device. 

Removing - the UAG is unmounting the USB storage device. 

none - the USB device is operating normally or not connected.

Table 29   

Monitor > System Status > USB Storage (continued)

LABEL

DESCRIPTION

Содержание UAG5100


























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов