ZyXEL Communications UAG5100, Руководство пользователя

Страница: 403 / 505

Chapter 41 System
UAG5100 User’s Guide
403
41.6.3 Address Record
An address record contains the mapping of a Fully-Qualified Domain Name (FQDN) to an IP
address. An FQDN consists of a host and domain name. For example, www.zyxel.com is a fully
qualified domain name, where “www” is the host, “zyxel” is the second-level domain, and “com” is
the top level domain. mail.myZyXEL.com.tw is also a FQDN, where “mail” is the host, “myZyXEL” is
the third-level domain, “com” is the second-level domain, and “tw” is the top level domain.
The UAG allows you to configure address records about the UAG itself or another device. This way
you can keep a record of DNS names and addresses that people on your network may use
frequently. If the UAG receives a DNS query for an FQDN for which the UAG has an address record,
the UAG can send the IP address in a DNS response without having to query a DNS name server.
41.6.4 PTR Record
A PTR (pointer) record is also called a reverse record or a reverse lookup record. It is a mapping of
an IP address to a domain name.
41.6.5 Adding/Editing an Address/PTR Record
Click the Add icon or select an entry and click the Edit icon in the Address/PTR Record table to
configure an address/PTR record.
IP/FQDN This is the IP address or Fully-Qualified Domain Name (FQDN) of a mail server that
handles the mail for the domain specified in the field above.
Service Control This specifies from which computers and zones you can send DNS queries to the UAG.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so. Note that subsequent entries move up by one when you take this action.
Move To change an entry’s position in the numbered list, select the method and click Move to
display a field to type a number for where you want to put it and press [ENTER] to move
the rule to the number that you typed.
# This the index number of the service control rule. The ordering of your rules is important
as rules are applied in sequence.
The entry with a hyphen (-) instead of a number is the UAG’s (non-configurable) default
policy. The UAG applies this to traffic that does not match any other configured rule. It is
not an editable rule. To apply other behavior, configure a rule that traffic will match so the
UAG will not have to use the default policy.
Zone This is the zone on the UAG the user is allowed or denied to access.
Address This is the object name of the IP address(es) with which the computer is allowed or
denied to send DNS queries.
Action This displays whether the UAG accepts DNS queries from the computer with the IP
address specified above through the specified zone (Accept) or discards them (Deny).
Table 189
Configuration > System > DNS (continued)
LABEL DESCRIPTION