ZyXEL Communications UAG4100 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 477

ZyXEL Communications UAG4100 Скачать руководство пользователя страница 88

Chapter 7 Monitor

UAG4100 User’s Guide

88

The following table describes the labels in this screen.

7.11 The Dynamic Guest Screen

Dynamic guest accounts can be automatically generated for guest users by using a connected
statement printer or the web configurator with the guest-manager account (see

Section 26.3.1 on

for more information). A dynamic guest account has a dynamically-created user name

and password. Guest users can log in with the dynamic guest accounts when connecting to an SSID

Table 29

Monitor > System Status > USB Storage

LABEL

DESCRIPTION

Device description

This is a basic description of the type of USB device.

Usage

This field displays how much of the USB storage device’s capacity is currently being
used out of its total capacity and what percentage that makes.

Filesystem

This field displays what file system the USB storage device is formatted with. This field
displays

Unknown

if the file system of the USB storage device is not supported by the

UAG, such as NTFS.

Speed

This field displays the connection speed the USB storage device supports.

Status

Ready

- you can have the UAG use the USB storage device.

Click

Remove Now

to stop the UAG from using the USB storage device so you can

remove it.

Unused

- the connected USB storage device was manually unmounted by using the

Remove Now

button or for some reason the UAG cannot mount it.

Click

Use It

to have the UAG mount a connected USB storage device. This button is

grayed out if the file system is not supported (unknown) by the UAG.

none

- no USB storage device is connected.

Detail

This field displays any other information the UAG retrieves from the USB storage
device.

Deactivated

- the use of a USB storage device is disabled (turned off) on the UAG.

OutofSpace

- the available disk space is less than the disk space full threshold (see

Section 40.2 on page 363

for how to configure this threshold).

Mounting

- the UAG is mounting the USB storage device.

Removing

- the UAG is unmounting the USB storage device.

none

- the USB device is operating normally or not connected.

«
...
86
87
88
89
90
...
»

Содержание UAG4100






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов