ZyXEL Communications UAG2100, Руководство пользователя

Страница: 91 / 617

UAG Series User’s Guide
91
C
H A P T E R
7
Monitor
7.1 Overview
Use the Monitor screens to check status and statistics information.
7.1.1 What You Can Do in this Chapter
Use the Monitor screens for the following.
• Use the System Status > Port Statistics screen (see Section 7.2 on page 92 ) to look at packet
statistics for each physical port.
• Use the System Status > Port Statistics > Graph View screen (see Section 7.2 on page 92 )
to look at a line graph of packet statistics for each physical port.
• Use the System Status > Interface Status screen (see Section 7.3 on page 94 ) to see all of
the UAG’s interfaces and their packet statistics.
• Use the System Status > Traffic Statistics screen (see Section 7.4 on page 97 ) to start or
stop data collection and view statistics.
• Use the System Status > Session Monitor screen (see Section 7.5 on page 99 ) to view
sessions by user or service.
• Use the System Status > DDNS Status screen (see Section 7.6 on page 101 ) to view the
status of the UAG’s DDNS domain names.
• Use the System Status > IP/MAC Binding screen (see Section 7.7 on page 101 ) to view a list
of devices that have received an IP address from UAG interfaces with IP/MAC binding enabled.
• Use the System Status > Login Users screen (see Section 7.8 on page 102 ) to look at a list of
the users currently logged into the UAG.
• Use the System Status > Dynamic Guest screen (see Section 7.9 on page 103 ) to look at a list
of the guest user accounts, which are created automatically and allowed to access the UAG’s
services for a certain period of time.
• Use the System Status > UPnP Port Status screen (see Section 7.10 on page 105 ) to look at
a list of the NAT port mapping rules that UPnP creates on the UAG.
• Use the System Status > USB Storage screen (see Section 7.11 on page 106 ) to view
information about a connected USB storage device.
• Use the System Status > Ethernet Neighbor screen (see Section 7.12 on page 107 ) to view
and manage the UAG’s neighboring devices via Layer Link Discovery Protocol (LLDP).
• Use the AP Information > AP List screen (see Section 7.13 on page 109 ) to view which APs
are currently connected to the UAG.
• Use the AP Information > Radio List screen (see Section 7.14 on page 112 ) to view statistics
about the wireless radio transmitters in each of the APs connected to the UAG.
• Use the Station Info > Station List screen (see Section 7.15 on page 115 ) to view statistics
pertaining to the connected stations (or “wireless clients”).