ZyXEL Communications STB-1001S, Руководство пользователя

Страница: 99 / 137

Appendix A Setting up Your Computer’s IP Address
STB-1001S User’s Guide
99
Figure 56 Windows XP: Internet Protocol (TCP/IP) Properties
6 If you do not know your gateway's IP address, remove any previously installed
gateways in the
IP Settings tab and click OK .
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add .
• In TCP/IP Address , type an IP address in IP address and a subnet mask in Subnet
mask , and then click Add .
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the
IP Settings tab by clicking Add in
Default gateways .
• In TCP/IP Gateway Address , type the IP address of the default gateway in Gateway .
To manually configure a default metric (the number of transmission hops), clear the
Automatic metric check box and type a metric in Metric .
• Click Add .
• Repeat the previous three steps for each default gateway you want to add.
• Click
OK when finished.