background image

Appendix C Legal Information

STB-1001S2 User’s Guide

74

If this device does cause harmful interference to radio/television reception, which can be 
determined by turning the device off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

1

Reorient or relocate the receiving antenna.

2

Increase the separation between the equipment and the receiver.

3

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.

4

Consult the dealer or an experienced radio/TV technician for help.

Notices 

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Viewing Certifications

1

Go to 

http://www.zyxel.com

.

2

Select your product on the ZyXEL home page to go to that product's page.

3

Select the certification you wish to view from this page.

Licensed Hardware Codecs

Supply of this product does not convey a license or imply any right to distribute content 
created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable 
and/or other distribution channels), streaming applications (via Internet, intranets and/or other 
networks), other content distribution systems (pay-audio or audio-on-demand applications and 
the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, 
hard drives, memory cards and the like). An independent license for such use is required. For 
details, please visit http://mp3licensing.com.

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this product is free from any defects 
in materials or workmanship for a period of up to two years from the date of purchase. During 
the warranty period, and upon proof of purchase, should the product have indications of failure 
due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the 
defective products or components without charge for either parts or labor, and to whatever 
extent it shall deem necessary to restore the product or components to proper operating 
condition. Any replacement will consist of a new or re-manufactured functionally equivalent 
product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty 
shall not apply if the product has been modified, misused, tampered with, damaged by an act 
of God, or subjected to abnormal working conditions.

Содержание SMG-700

















































































Отзывы: