ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 433 / 464

Chapter 61 ACL Commands
SAM1316-22 User’s Guide
433
where
This command allows you to apply an ACL profile to the specified port(s). You can
apply up to eight profiles to a subscriber port.
The following example applies the ACL profile “test” to a PVC.
Figure 270 ACL Assignment Set Command Example
61.2.2 ACL Assignment Delete Command
Syntax:
ras> switch acl delete <portlist> <vpi> <vci> <profile>
where
This command allows you to remove an ACL profile from the specified PVC.
61.2.3 ACL Assignment Show Command
Syntax:
ras> switch acl show [<portlist>] [<vpi> <vci>]
<portlist> =
The port number of the PVC. You can specify a single
DSL port <1>, all DSL ports <*> or a list of DSL ports
<1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> =
The VPI of the PVC.
<vci> =
The VCI of the PVC.
<profile> =
The name of the ACL profile.
ras> switch acl set 1 0 33 test
<portlist> =
The port number of the PVC. You can specify a single
DSL port <1>, all DSL ports <*> or a list of DSL ports
<1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> =
The VPI of the PVC.
<vci> =
The VCI of the PVC.
<profile> =
The name of the ACL profile.