ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 426 / 464

Chapter 60 Virtual Channel Management
SAM1316-22 User’s Guide
426
where
This command sets the second VLAN tag to add to the packets from the PVC.
The following example adds VLAN tag
100
to traffic using the
DEFVAL
ATM profile
on PVC (
1/33
) on port
2
.
Figure 265 TLS PVC Set Command Example
60.9.3 TLS PVC Show Command
Syntax:
ras> shdsl tlspvc show [<portlist> [<vpi> <vci>]]
where
<portlist> =
The port number of the TLS PVC. You can specify a
single DSL port <1>, all DSL ports <*> or a list of DSL
ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> =
The VPI of the TLS PVC.
<vci> =
The VCI of the TLS PVC.
<DS vcprofile =
Assign a VC profile to use for this channel’s downstream
traffic shaping.
[,US
vcprofile]>
=
Assign a VC profile to use for policing this channel’s
upstream traffic. The SAM1316-22 does not perform
upstream traffic policing if you do not specify an
upstream VC profile.
<pvid> =
1 – 4094; the (second) VLAN Identifier to add to
Ethernet frames that the system routes using this PVC.
<priority> =
Set the IEEE 802.1p priority (0~7) to add to the traffic
that uses this PVC.
ras> shdsl tlspvc set 2 1 33 DEFVAL 100 0
<portlist> =
The port number of the TLS PVC. You can specify a
single DSL port <1>, all DSL ports <*> or a list of DSL
ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
<vpi> =
The VPI of the TLS PVC.
<vci> =
The VCI of the TLS PVC.