ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 398 / 464

Chapter 59 DSL Commands
SAM1316-22 User’s Guide
398
This command configures DSL port alarm thresholds. The SAM1316-22 sends an
alarm trap and generates a syslog entry when the thresholds of the alarm profile
are exceeded.
Configure alarm profiles first and then use the
shdsl alarmprofile map
command to use them with specific DSL ports.
The following example sets an alarm profile named SESalarm that has the
SAM1316-22 send an alarm trap and generate a syslog whenever the connection’s
number of severely errored seconds exceeds three within a 15 minute period.
59.3.3 Alarm Profile Delete Command
Syntax:
ras> shdsl alarmprofile delete <profile>
where
This command allows you to delete an individual alarm profile by its name. You
cannot delete the DEFVAL alarm profile.
The following example deletes the
SESalarm
alarm profile.
<es> =
The number of Errored SecondS (0~900) that are
permitted to occur within 15 minutes.
<ses> =
The number of Severely Errored Seconds (0~900) that
are permitted to occur within 15 minutes.
<crc>
The number of Cyclic Redundancy Checking anomalies
that are permitted to occur within 15 minutes.
<losws>
The number of Loss Of Sync Word Seconds (0~900)
that are permitted to occur within 15 minutes.
<uas> =
The number of UnAvailable Seconds (0~900) that are
permitted to occur within 15 minutes.
ras> shdsl alarmprofile set SESalarm ses 3
<profile> =
The name of an alarm profile.
Figure 233 Alarm Profile Delete Command Example
ras> shdsl alarm profile delete SESalarm