ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 258 / 464

Chapter 41 Alarm
SAM1316-22 User’s Guide
258
41.6 Alarm History Screen
This screen displays the alarms that have been raised by the SAM1316-22,
including the severity level of an alarm(s) and the date/time when the alarm
occured.
To open this screen, click Alarm, Alarm History.
Figure 124 Alarm Status
The following table describes the labels in this screen.
Table 99 Alarm Status
LABEL DESCRIPTION
Alarm Status Click Alarm Status to go to a screen that displays the alarms that
are currently in the system (see
Section 41.2 on page 251 ).
Alarm Event
Setup Click Alarm Event Setup to go to a screen where you can configure
the severity level of an alarm(s) and where the system is to send the
alarm(s). See
Section 41.4 on page 253 .
Alarm Port Setup Click Alarm Port Setup to go to a screen where you can configure
the alarm severity threshold for sending SNMP traps or sys logs for
alarms on an individual port(s). See
Section 41.5 on page 256 .
Alarm Type Select which type of alarms to display by Severity, or select All to
look at all the alarms.
Refresh Click this button to update this screen.
Clear Click this button to erase the clearable alarm entries.
No This field displays the index number of the alarm entry in the system.
Alarm This field displays the alarm category to which the alarm belongs.
Condition This field displays a text description for the condition under which the
alarm applies.
Severity This field displays the alarm severity level (critical, major, minor or
info).
Timestamp This field displays the month, day, hour, minute and second that the
system created the log.
Source This field displays where the alarm originated. This is either a DSL
port number, one of the Ethernet ports (enet 1 or 2), or “eqpt” for the
system itself.