ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 255 / 464

Chapter 41 Alarm
SAM1316-22 User’s Guide
255
41.4.1 Edit Alarm Event Setup Screen
Use this screen to specify the severity level of an alarm(s) and where the system
is to send the alarm(s).
To open this screen, click Alarm, Alarm Status. Then, click an alarm’s index
number.
Figure 122 Alarm Event Setup Edit
The following table describes the labels in this screen.
Facility This field displays the log facility (local1~local7) on the syslog server
where the system is to log this alarm. This is for alarms that send
alarms to a syslog server.
SNMP This field displays “V” if the system is to send this alarm to an SNMP
server. It displays “-“ if the system does not send this alarm to an
SNMP server.
Syslog This field displays “V” if the system is to send this alarm to a syslog
server. It displays “-“ if the system does not send this alarm to a
syslog server.
Severity This field displays the alarm severity level (critical, major, minor or
info).
Clearable This displays “V” if the alarm clear command removes the alarm from
the system. It displays “-“if the alarm clear command does not
remove the alarm from the system.
Table 96 Alarm Event Setup (continued)
LABEL DESCRIPTION
Table 97 Alarm Event Setup Edit
LABEL DESCRIPTION
Alarm This field displays the alarm category to which the alarm belongs.
eqpt represents equipment alarms.
dsl represents Digital Subscriber Line (DSL) alarms.
enet represents Ethernet alarms.
sys represents system alarms.
Condition Code This field displays the condition code number for the specific alarm
message.
Condition This field displays a text description for the condition under which the
alarm applies.