ZyXEL Communications SAM1316-22, Руководство пользователя

Страница: 178 / 464

Chapter 24 Port Authentication
SAM1316-22 User’s Guide
178
24.3 802.1x Screen
To open this screen, click Advanced Application, Port Authentication,
802.1x.
Figure 86 802.1x
The following table describes the labels in this screen.
Table 54 802.1x
LABEL DESCRIPTION
RADIUS/Local
Profile Click this link to configure the RADIUS server or local profile settings
(see
Section 24.2 on page 176 ).
Enable Select this check box to turn on IEEE 802.1x authentication on the
switch.
Apply Click Apply to save your changes to the SAM1316-22’s volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Port This field displays a port number.
Enable Select this check box to turn on IEEE 802.1x authentication on this
port.
Control Select AUTO to authenticate all subscribers before they can access
the network through this port.
Select FORCE AUTHORIZED to allow all connected users to access
the network through this port without authentication.
Select FORCE UNAUTHORIZED to deny all subscribers access to the
network through this port.
Reauthentication Specify if a subscriber has to periodically re-enter his or her
username and password to stay connected to the port.