ZyXEL Communications RGS Series Скачать руководство пользователя страница 173

Страница: 173 / 259

173

5.4 Monitor

5.4.1 System – System Information

The switch system information is provided here.

Object

Description

Contact

The system contact configured in Configuration | System | Information | System
Contact.

Name

The system name configured in Configuration | System | Information | System Name.

Location

The system location configured in Configuration | System | Information | System
Location.

MAC Address

The MAC Address of this switch.

Chip ID

The Chip ID of this switch.

System Date

The current (GMT) system time and date. The system time is obtained through the
Timing server running on the switch, if any.

System Uptime

The period of time the device has been operational.

Software Version

The software version of this switch.

Software Date

The date when the switch software was produced.

Buttons

Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.

Click to refresh the page.

Содержание RGS Series




































































































































































































































































Результаты поиска

Содержание RGS Series

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications RGS Series, Руководство пользователя

Результаты поиска

Содержание RGS Series

Отзывы:

Бренды по названию

Популярные бренды