ZyXEL Communications Prestige 661H Series, Руководство пользователя

Страница: 413 / 547

Prestige 661H/HW Series User’s Guide
413 Chapter 43 SA Monitor
Figure 265 Menu 27.2 SA Monitor
The following table describes the fields in this menu.
Menu 27.2 - SA Monitor
# Name Encap. IPSec ALgorithm
--- -------------------------------- --------- ----------------
001 Taiwan : 3.3.3.1 – 3.3.3.3.100 Tunnel ESP DES MD5
002
003
004
005
006
007
008
009
010
Select Command= Refresh
Select Connection= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 142 Menu 27.2 SA Monitor
FIELD DESCRIPTION
# This is the security association index number.
Name This field displays the identification name for this VPN policy. This name is unique for
each connection where the secure gateway IP address is a public static IP address.
When the secure gateway IP address is 0.0.0.0 (as discussed in the last chapter), there
may be different connections using this same VPN rule. In this case, the name is
followed by the remote IP address as configured in Menu 27.1.1. – IPSec Setup .
Individual connections using the same VPN rule may be terminated without affecting
other connections using the same rule.
Encap. This field displays Tunnel mode or Transport mode. See previous for discussion.
IPSec
Algorithm
This field displays the security protocols used for an SA. ESP provides confidentiality
and integrity of data by encrypting the data and encapsulating it into IP packets.
Encryption methods include 56-bit DES and 168-bit 3DES . NULL denotes a tunnel
without encryption.
An incoming SA may have an
AH in addition to ESP . The Authentication Header
provides strong integrity and authentication by adding authentication information to IP
packets. This authentication information is calculated using header and payload data in
the IP packet. This provides an additional level of security. AH choices are MD5 (default
- 128 bits) and SHA -1 (160 bits).
Both AH and ESP increase Prestige processing requirements and communications
latency (delay).