Prestige 645M-A1 ADSL Bridge
To get to the System Status, enter number 24 to go to
Menu 24 - System Maintenance.
From this menu,
select number 1. System Status
.
There are two commands in
Menu 24.1 - System Maintenance - Status
.
Entering 1 resets the counters and
[ESC]
takes you back to the previous screen.
The table below describes the fields present in
Menu 24.1 - System Maintenance - Status
. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Please note that displaying this screen degrades system performance.
Figure 6-2 System Maintenance – Status
Table 6-1 System Maintenance – Status
FIELD DESCRIPTION
Node-Lnk
This is the remote node index number and link type. Link types are
PPP
and
RFC
1483
.
Status
Shows the status of the remote node.
TxPkts
The number of packets transmitted to this remote node.
RxPkts
The number of packets received from this remote node.
Errors
The number of error packets on this connection.
Menu 24.1 - System Maintenance – Status
Node-Lnk
1-1483
2
3
4
5
6
7
8
Status
Up
N/A
N/A
N/A
N/A
N/A
N/A
N/A
TxPkts
1462
0
0
0
0
0
0
0
RxPkts
1567
0
0
0
0
0
0
0
Errors
0
0
0
0
0
0
0
0
Tx B/s
222
0
0
0
0
0
0
0
Rx B/s
211
0
0
0
0
0
0
0
Up Time
2:15:16
0:00:00
0:00:00
0:00:00
0:00:00
0:00:00
0:00:00
0:00:00
Ethernet:
Status: 10M/Full Duplex
Collisions: 0
Tx Pkts: 1583
Rx Pkts: 1521
WAN:
Line Status: Up
Upstream Speed: 608 kbps
Downstream Speed: 4000 kbps
CPU Load = 4.25%
Press Command:
COMMANDS: 1-Reset Counters ESC-Exit
6-2
System
Maintenance