manualshive.com logo in svg

ZyXEL Communications PMG5318-B20A, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications PMG5318-B20A Скачать руководство пользователя страница 135

 Chapter 15 Firewall

PMG5318-B20A User’s Guide

135

15.4  Firewall Technical Reference

This section provides some technical background information about the topics covered in this 
chapter.

15.4.1  Firewall Rules Overview

Your customized rules take precedence and override the GPON Device’s default settings. The GPON 
Device checks the source IP address, destination IP address and IP protocol type of network traffic 
against the firewall rules (in the order you list them). When the traffic matches a rule, the GPON 
Device takes the action specified in the rule. 

Firewall rules are grouped based on the direction of travel of packets to which they apply: 

Note: The LAN includes both the LAN port and the WLAN.

By default, the GPON Device’s stateful packet inspection allows packets traveling in the following 
directions:

• LAN  to  WAN

These rules specify which computers on the LAN can access which computers or services on the 
WAN.

By default, the GPON Device’s stateful packet inspection drops packets traveling in the following 
directions:

• WAN  to  LAN

These rules specify which computers on the WAN can access which computers or services on the 
LAN. 

Note: You also need to configure NAT port forwarding (or full featured NAT address 

mapping rules) to allow computers on the WAN to access devices on the LAN.

You may define additional rules and sets or modify existing ones but please exercise extreme 
caution in doing so.

For example, you may create rules to:

• Block certain types of traffic, such as IRC (Internet Relay Chat), from the LAN to the Internet.
• Allow certain types of traffic, such as Lotus Notes database synchronization, from specific hosts 

on the Internet to specific hosts on the LAN.

Cancel

Click this to restore your previously saved settings.

Delete

Click this to delete the current rule.

Table 52   

Security > Firewall > Rules: Edit: Edit Customized Services: Config

LABEL

DESCRIPTION

• WAN  to  LAN
• LAN  to  WAN

Содержание PMG5318-B20A









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды