Quick Start Guide
PMG5317-T20B
Wireless N GPON HGU with 4-port
GbE Switch and USB
ENGLISH
Connect the fiber optic cable from your service
provider's network to the
PON
port.
Warning! To avoid possible eye injury, do NOT
look into an operating fiber-optic module's
connector.
Connect a phone to the phone port using the phone cable.
Connect a computer to the
LAN
port using the yellow
Ethernet cable.
Connect the power cable to the modem and press the
power button.
Note: Only use the
USB
port for file sharing.
Make sure the LEDs are on and check the status.
EN
1
Configuring your PMG5317-T20B
Open a web brower and go to http://192.168.1.1
Enter the default
User Name (admin)
and
Password (1234)
, then
click
Login
.
2
3
4
EN
5
PMG5317-T20B
User Name
Password
1234
admin
1
Hardware Connections
LAN
Internet Setup
Login
User Name :
admin
Password :
1234
(default)
http://192.168.1.1
1
5
PHONE
PON
POWER
4
3
2
POWER
BATT
ALM
PON
INTERNET
LAN
PHONE
USB
WLAN/
WPS
1
3
4
1
2
2
POWER
PON
1
LAN
On: Power on and system ready.
Off: Power off.
1
PHONE
On : Registered to IMS but no voice
communication.
Blinking: Voice on communication.
Off: No registered SIP accounts to this line,
or device power off.
On: Linked successfully.
Blinking: Trying to link up.
Off: Link off.
On : Linked successfully. (Any LAN port)
Blinking: Data transmitting.
Off : Link off.
1/2
2
2
1
4
1
3
POWER
ON
