Chapter 11 Interface Grouping
PMG2006-T20A User’s Guide
94
11.2.2 Interface Grouping Criteria
Click the
Add
button in the
Interface Grouping Configuration
screen to open the following screen.
Figure 59
Interface Grouping Criteria
The following table describes the fields in this screen.
OK
Click
OK
to save your changes back to the PMG2006-T20A.
Cancel
Click
Cancel
to exit this screen without saving.
Table 41 Interface Group Configuration (continued)
LABEL
DESCRIPTION
Table 42 Interface Grouping Criteria
LABEL
DESCRIPTION
Source MAC
Address
Select this option and enter the source MAC address of the packet.
DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such
as the type of the hardware or firmware.
Enable
wildcard
Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP
option 60.
DHCP Option 61 Select this and enter the device identity of the matched traffic.
DHCP Option
125
Select this and enter vendor specific information of the matched traffic.
Enterprise
Number
Enter the vendor’s 32-bit enterprise number registered with the IANA (Internet Assigned Numbers
Authority).
Manufactur
er OUI
Specify the vendor’s OUI (Organization Unique Identifier). It is usually the first three bytes of the
MAC address.
Serial
Number
Enter the serial number of the device.
Product
Class
Enter the product class of the device.
OK
Click
OK
to save your changes back to the PMG2006-T20A.
Cancel
Click
Cancel
to exit this screen without saving.
