Chapter 2 The Web Configurator
PMG1006-B20A User’s Guide
12
2.2.2 Navigation Panel
The following table describes the menu items on the navigation panel.
2.2.3 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document. The Status screen displays after you log in. See
for details about
the Status screen.
2.2.4 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration has been updated.
Table 2
Navigation Panel Summary
LINK
TAB
FUNCTION
Status
This screen shows the GPON Device’s general device and interface status
information.
Network
LAN
IP
Use this screen to configure your GPON Device’s LAN IP address and subnet
mask.
Maintenance
SLID
SLID
Use this screen to change your GPON Device’s Subscriber Location ID (SLID)
setting. The SLID identifies your device to the GPON service provider.
System
General
Use this screen to configure your GPON Device’s name, management
inactivity timeout, and password.
Transceiver
Use this screen to view current status information for the GPON Device’s
optical transceiver and configure transceiver alarm thresholds.
Logs
View Log
Use this screen to display your GPON Device’s logs.
Log Settings
Use this screen to select which logs the GPON Device records.
Tools
Firmware
Use this screen to upload firmware to your GPON Device.
Configuration
Use this screen to backup and restore your GPON Device’s configuration
(settings) or reset the factory default settings.
Restart
Use this screen to reboot the GPON Device without turning the power off.
